New Products

ES-UB2-200-W

ES-UB2-200-W

Price: $3.54
ES-UB2-100-W

ES-UB2-100-W

Price: $2.63
ES-UB2-200-BK

ES-UB2-200-BK

Price: $3.54

News

PAYMENT VIA VISA / MASTERCARD

08 Mar 2017

We would like to inform customers, if making payment via Visa / MasterCard you will be presented with the PayPal payment portal at checkout. If you "Checkout as a Guest" you should be able to manually submit your Visa / MasterCard details without the need of a PayPal account.


Website ordering problem - EU Companies

18 Jan 2016

Unfortunately, due to a problem with our website EU Companies will be charged Vat whether you have a valid vat number or not. Please can you either complete the transaction with the Vat paid and we will reimburse the amount immediately. Alternatively, please call sales and your order will be processed manually without the vat.


EasySYNC Further Expands Portfolio of USB Instruments with Pocket-Sized Logic/Protocol Analyser

14 Jun 2013

EasySYNC Ltd, a specialist in USB communications and instrumentation systems, introduces the ES-DLA-8/16. This multi-purpose PC-based analysis device is part of the company’s USB Instruments product range. It combines logic analyser and protocol analyser functionality in a single lightweight product of compact dimensions. It features multi-channel operation, capture clock (external and internal), plus a broad range of triggering and data capture modes. As it is powered from a USB port, it avoids the need for an external power supply.

Measuring just 40mm x 10mm x 53mm, the ES-DLA-8/16 offers a choice of 8 or 16 data acquisition channels, a maximum sampling rate of 60 MHz run length encoding (RLE) or 4 bit raw and an external clock input. The triggering modes supported by it are rising edge, falling edge, high level and low level – allowing analysis flexibility to be increased. Furthermore a pre-trigger mode enables the position of the trigger in the acquired data to be set at 0%, 25%, 50%, 75% or 100% buffer. A maximum of 1 billion samples in total can be stored through the supplied EasyLogic software application . When operating as a protocol analyser, the ES-DLA-8/16 supports I2C, SPI, asynchronous serial (UART) and OneWire serial bus protocols.

“The ES-DLA-8/16, along with our latest Stingray oscilloscope/data logger/spectrum analyser, present the industry with a new breed of cost-effective analysis tools that are highly portable and simple to use,” states Susan Maxwell, General Manager at EasySYNC, “These instruments give engineers access to a breadth of test functionality without having to invest heavily in the purchasing of multiple pieces of equipment.”

The ES-DLA-8/16’s firmware is upgradeable via a USB interconnect to maximise convenience for future hardware updates. Logic analyser software, EasyLogic, for both Windows and MAC platforms is available and downloadable royalty free at: http://www.easysync-ltd.com/page/13/software.html

Certified drivers are available for Windows XP, Windows Vista, Windows 7, and Windows 8, both 32-bit or 64-bit operating systems and Mac OS X 10.7~10.8. The instrument is offered in a sleek, attractive enclosure with rubberized mouldings for added ruggedness. Probes and a carrying bag are included too.

The pricing for the ES-DLA-16 is $149.00, while pricing for the ES-DLA-8 is $99.00 for single units.


About EasySYNC
Established in 2001, EasySYNC Ltd is a supplier of communications and instrumentation products with specialist expertise in serial connectivity solutions based on USB, CAN and RS232/RS422/RS485 interfaces. The company’s product range includes USB serial adapters, USB-to-CANBus adapters, USB-to-RS232 adapters, USB-to-RS422 adapters, USB-to-RS485 adapters, USB-to-Ethernet converters, USB based oscilloscopes, data loggers and logic analysers. EasySYNC Ltd has sales offices in Europe and North America.
http://www.easysync-ltd.com
 


New WHQL Certified Driver Released

25 Apr 2013

 

EasySYNC Limited is pleased to announce the availability of a new WHQL certified driver following the release of the new FTDI driver. The new version (2.08.28) can be downloaded from the website and is intended for use on the following products: DS60M10, DS1M12, ES-DLA-8, ES-DLA-16, PS40M10, USB2-F-7001, USB2-F-7101. These drivers are also available through the Microsoft Windows Update service for automatic upgrades.

 


Latest EasySYNC USB Multi-Function Instrument Provides Cost Effective Measurement & Analysis

20 Feb 2013

EasySYNC Ltd, a specialist in USB communications and instrumentation systems, has added a new member to its highly popular Stingray family of multi-function test equipment products, with improved performance and a greater breadth of features. The new DS60M10, which is part of its USB Instruments™ range, combines an oscilloscope, data logger, spectrum analyser, voltmeter and frequency meter in a single compact, lightweight and inexpensive product. With dual channel operation, it offers 10-/8-bit data streaming simultaneously on both channels. As it is USB-based, drawing 500 mA from a standard interface port, it does not need connection to any other power source.
 
The DS60M10’s oscilloscope supports speeds of 60 MHz, while its data logger has a sampling rate that reaches up to 1 kSamples/s. The analog inputs of the built-in voltmeter have a maximum range of ±50 VDC (35 VRMSAC). For measuring high voltages use of differential probes is recommended.
 
The instrument is housed in an enclosure (with rubberised mouldings) that has dimensions of just 116 mm x 30 mm x 100 mm and weighs only 0.41 kg (excluding cable). This means it is highly optimised for utilisation in the field. A compact carrying case is provided.
 
The oscilloscope and data logger functions of the DS60M10 are supported by the newly enhanced EasyScope III data acquisition/manipulation software which is available to download royalty free. This has two oscilloscope/data logging channels with FFT spectrum analysis capabilities on each channel. It is now, for the first time, suitable for use with MAC based operating systems as well as Windows.
 
As Susan Maxwell, General Manager at EasySYNC, comments, “The Stingray offering has proved highly successful, giving engineers a very convenient and inexpensive way to carry out a variety of analysis tasks. This new addition to the family has the same packaging that users are already familiar with, while benefiting from great speed levels – thus enabling trouble-free upgrading.” “They also have greater system flexibility thanks to the option of MAC OS x support,” she concludes.”
 
The pricing for the DS60M10 is $249.00 for single units (with student discount available).


EasySYNC Introduces its Latest Serial-to-CANbus Solution

17 Jul 2012

EasySYNC Ltd, a specialist in USB communications and instrumentation systems, announces the release of its CAN-DP serial-to-CANbus converter modules. This new hardware offering enables engineers to quickly and simply add a CANbus port to their PC or embedded system by connection through a serial interconnect.

 

The dual in-line package (DIP) form factor utilised by the modules means they fit into standard 28-pin, 0.6-inch IC sockets, optimising them for inclusion in OEM designs or on prototyping boards to assist the development process. Each CAN-DP module supports operation through both RS232 and transistor-transistor logic (TTL) serial interfaces. They can deal with speeds of up to 1Mbit/s on both their serial and CANbus interfaces.

 

The integrated electronics used by these modules includes a PIC18F4680 8-bit microcontroller unit (MCU) with ECAN control function and 10-bit analogue-to-digital converter (ADC), plus a MCP2551 CANbus transceiver IC. The MCU runs firmware that converts the data from its serial/UART format to the CANbus protocol. The CANbus transceiver IC converts logic level signals from the PIC microcontroller’s CANbus interface into CANbus physical signals. A set of 3 LED emitters incorporated into the module provide a visual indication of the CANbus status.

 

Communication is executed via ASCII commands passed to the CANbus controller. The command set utilised is identical to the one employed by EasySYNC’s S1-A-7001 RS232-to-CANbus adapter, allowing current designs based on that unit to be upgraded without necessitating any change in the software.

 

The CAN-DP can be powered by a +6 VDC to +15 VDC supply voltage. The module is capable of supporting an operational temperature range of –40 ⁰C to +85 ⁰C and fits onto a compact 18.0 mm x 38.5 mm PCB in order to minimise required board space.

 

The pricing for the CAN-DP is $ 67.00 for single units and $57.00 each for 100 units.

 

 

About EasySYNC:

Established in 2001, EasySYNC Ltd is a supplier of communications and instrumentation products with specialist expertise in serial connectivity solutions based on USB, CAN and RS232/RS422/RS485 interfaces.

 

The company’s product range includes USB serial adapters, USB-to-CANBus adapters, USB-to-RS232 adapters, USB-to-RS422 adapters, USB-to-RS485 adapters, USB-to-Ethernet converters, USB based oscilloscopes, data loggers and logic analysers. EasySYNC Ltd has sales offices in Europe and North America. http://www.easysync-ltd.com

 

For further information and reader inquiries:

Susan Maxwell, EasySYNC Ltd,

7235 NW Evergreen Parkway, Suite 600

Hillsboro, OR 97124-5803,

USA Tel: +1 503 547-0909 Fax: +1 (503) 547-0987

E-mail: sales@easysync-ltd.com

 

Issued by: Mike Green Pinnacle Marketing Communications Ltd

Tel: +44 (0) 20 84296543

E-mail: m.green@pinnaclemarcom.com

 

Formed in 2001 in Glasgow - Scotland, EasySYNC Ltd, a privately owned company, set up business to specialize in USB Serial RS232, RS422 and RS485 converter products. It's dedication to quality of service and its outstanding technical support quickly became appreciated by corporate and individual customers alike and sales rapidly expanded both in the United Kingdom and world-wide.

 

July 2012 Ref: EASYSYNCPR6


EasySYNC Releases Hi-Speed USB to Multi-Port RS232/RS422/RS485 Industrial Adapters

30 Jan 2012

Metal enclosure devices provide high performance serial connectivity in demanding industrial settings

 

 

EasySYNC Ltd, a specialist in USB communications and instrumentation systems, has introduced a new family of rugged, adapter modules. These products present a simple method for allowing legacy serial devices to interface with modern interconnect ports based on Universal Serial Interface (USB) technology. 

 

The adapter products in this family are subdivided into three series. Those in the USB2-H-100X-M series are designed for interfacing with RS232 level I/Os and have the capacity to support maximum data rates of 1 Mbps for each port. While the adapters in the USB2-H-500X-M and USB2-H-600X-M series are for interfacing with RS485 and RS422 level I/Os respectively, both supporting data rates of up to 8 Mbps for each port. 

 

Offered in single, dual, quad, 8 and 16 port configuration versions, each of the modules uses a standard USB-B device connector for attaching to an upstream host or hub port. All of them incorporate a USB 2.0 Hi-Speed bridge chip supplied by FTDI. 

 

Each channel of the adapter modules in this family has an industry-standard DE-9P connector, with the single and dual port modules also incorporating 5 mm terminal block connectors per channel, as an alternative interface option. They are capable of supplying an output voltage of +5 VDC at currents levels of up to 80 mA on the 5 mm terminal block connectors or 30 mA on the DB9 connectors. Integrated transmitter and receiver LEDs provide a visual indication of data traffic passing through the modules. 

 

These products are contained within metal enclosures allowing them to be utilized in harsh industrial environments. They have an operational temperature range that spans from -40 °C to +85 °C. All members of this family are fully compliant with both FCC Part 15 Subpart B and European EMC directive. 

 

“EasySYNC’s plug-and-play adapter modules mean engineers can benefit from functionality afforded by current computing hardware so that existing automation and industrial control systems can gain advanced functionality,” states Susan Maxwell, General Manager of EasySYNC. “With these new, more robust additions to our product portfolio, the scope of application areas that can be supported is greatly expanded.” 

 

The new modules require USB device drivers to make them appear as Virtual COM Ports (VCPs). These drivers, which are available for Mac OS X, Linux Windows and Windows CE operating systems, can be downloaded free of charge from http://www.easysync-ltd.com/product-downloads.  

 

Unit pricing for the USB2-H-1001-M, USB2-H-5001-M and USB2-H-6001-M are $32.00, $39.00 and $41.50 respectively.  

 

About EasySYNC: Established in 2001, EasySYNC Ltd is a supplier of communications and instrumentation products with specialist expertise in serial connectivity solutions based on USB, CAN and RS232/RS422/RS485 interfaces. Product range includes USB serial adapters, USB-to-CANBus adapters, USB-to-RS232 adapters, USB-to-RS422 adapters, USB-to-RS485 adapters, USB-to-Ethernet converters, USB based oscilloscopes, data loggers and logic analysers. EasySYNC Ltd has sales offices in Europe and North America. http://www.easysync-ltd.com.


EasySYNC Enhances Market Presence of its USB Solutions Portfolio in North America

12 Aug 2011

Signing key distribution deals with both Allied & Mouser EasySYNC Ltd, a specialist in USB communications and supplier of USB instruments, has taken further steps to strengthen its sales channels in the North American market, with the announcement that it has engaged with two of the region’s leading distributors. Mouser Electronics and Allied Electronics will offer the company high level support from coast to coast, so that design engineers and procurement managers can source the products they need quickly and easily.

 

EasySYNC’sproduct range consists of single and multi-port, full speed and high speed USB to serial adapters and cables. These offer a simple method for connecting multiple serial interfaces, RS232, RS422 and RS485, to a single PC over USB. The company also provides USB to TTL level converter cables and CANbus solutions with RS232 and USB interfaces. In addition, EasySYNC supplies the popular DS1M12 Stingray USB instrument, which includes oscilloscope, data logger, spectrum analyzer, voltmeter, frequency meter and signal generator capabilities in a single device. Compact in size, as well as being easy to transport and connect to a PC or laptop, the Stingray is highly suited to remote, non-lab and educational environments. The free software provided offers a Graphical User Interface (GUI) for measurement and control with advanced triggering and analysis functions suitable for a multitude of applications.

 

“North America is a very important market for EasySYNC. Working with established distributors like Allied and Mouser will allow us to connect with OEM manufacturers and systems integrators in the region,” states Susan Maxwell, General Manager for EasySYNC. “These distribution agreements mean that we will be better positioned to address new opportunities for our products in a broad spectrum of industry sectors, offering customers cost effective and performance optimized ways to add USB to serial, USB to CANbus or RS232 to CANbus connectivity to their designs.”

 

For more information on the innovative EasySYNC products stocked by Allied Electronics go to: www.alliedelec.com.

 

For more information on the innovative EasySYNC products stocked by Mouser Electronics go to: www.mouser.com.

 

About EasySYNC : Established in 2001, EasySYNC Ltd is a supplier of communications and instrumentation products with specialist expertise in serial connectivity solutions based on USB, CAN and RS232/RS422/RS485 interfaces. Its product range from adapter boards and cables offering connectivity from USB to serial, Ethernet or CANbus interfaces to USB based oscilloscopes, data loggers and logic analyzers. http://www.easysync-ltd.com.


New EasySYNC CANbus Sample Application

10 Aug 2011

 

EasySYNC has just released a new sample application that demonstrates the use of the CANPlus programming API using Visual Studio C++ that may aid in your design efforts.
This sample application and source code is free and downloadable from the product pages on our website:
USB2-F-7001, USB to CANbus Adapter:
 
USB2-F-7101, USB to Isolated CANbus Adapter:
 
The new sample application and source code can be found on the product website:
1.Click on the product link above
2.Scroll down then Click on the “Downloads” tab
3.Look for: “New! - C++ DLL Demo Utility (GUI)”
4.Download these zip files directly from the links below:
 
If you have further questions, please feel free to contact your local support team.

 


New WHQL Certified Driver Released

06 May 2011

 

EasySYNC Limited is pleased to announce the availability of a new WHQL certified driver following the release of the new FTDI driver. The new version (2.08.14) can be downloaded from the website and is intended for use on the following products: DS1M12, PS40M10, USB2-F-7001, USB2-F-7101. These drivers are also available through the Microsoft Windows Update service for automatic upgrades.


New Hi-Speed USB to RS232/RS485 Adapters Launched

03 Sep 2010

EasySYNC Ltd, a specialist in USB communications and instrumentation systems, today launched two new serial adapter products, the USB2-H-9002-M and the USB-H-9004-M. These provide Hi-Speed USB 2.0 to multi-channel RS232/RS485 (DIL switch selectable) conversion capabilities, targeted at a wide range of communications and industrial control applications.

The USB2-H-9002-M adapter is a USB to 2-port RS232 or RS485 level serial UART adapter incorporating Future Technology Devices International, FTDI, FT2232H Hi-Speed USB2.0 (480Mb/s) to dual serial UART interface IC device.

The USB2-H-9004-M adapter is a USB to 4-port RS232 or RS485 level serial UART adapter incorporating the FTDI FT4232H Hi-Speed USB2.0 (480Mb/s) to quad serial UART interface IC device. The maximum RS485-level data rate is 10Mbps and the maximum RS232-level data rate is 1Mbps.

Selection of RS232 or RS485 signaling is made using DIL switches on the front of the adapter. Each of the dual or quad channels can be independently configured as either RS232 or RS485.
Each RS232 channel supports connectivity via a 9-pin, 5mm terminal block  while a 3 pin terminal block is used for each RS485 channel. The Ring Indicator (RI) pin of each RS232 channel can also be configured to output a +5V supply if the RI function is not required. 

TXD and RXD LEDs provide an independent visual indication of data traffic through each channel of the adapter. A power LED also indicates power to the adapter. Both modules come in a rugged metal enclosure which can be easily mounted to a standard DIN rail. The adapters can be powered entirely through from the USB interface or, if required, can be independently powered using an optional external +5V DC (1A) power supply which connects via a 2.1mm jack socket.

The USB2-H-900x-M adapter requires USB device drivers. These are available free of charge from EasySYNC at http:/www.easysync-ltd.com. These drivers allow the USB2-H-900x-M to appear as a Virtual COM Port (VCP). This enables serial communications using software utilities such as HyperTerminal, to exchange data through the USB2-H-900x-M to a legacy RS485 or RS232 peripheral device. The drivers are Microsoft Windows® WHQL-certified, Mac OS X, Linux and Windows CE device drivers.

The metal enclosure and flexible mounting allow the USB2-H-900x-M adapters to provide a fast, simple way to connect an RS232 or RS485 interface to USB. They can be used in a variety of applications, from a portable adapter to accompany a laptop to permanent installations in industrial, commercial and retail locations.

The adapters are FCC and CE approved and are specified over an operating temperature of -40°C to +85°C. The adapters come complete with a standard 0.9 meter USB cable and a +5V power supply.

The USB2-H-9002-M has a unit price of $120 (£77.92) and the USB2-H-9004-M has a unit price of $160 (£103.90). Units are available for ordering now with shipments expected in early September 2010.

Orders are now being accepted online at www.easysync-ltd.com or for more information, contact one of the sales offices:

UK Office (Global Headquarters)
EasySYNC Limited
Unit 1, 2 Seaward Place
Centurion Business Park
Glasgow G41 1HH
United Kingdom

Tel: +44 (0) 141 418 0181       
Fax: +44 (0) 141 418 0110

E-Mail (Sales): sales@easysync.co.uk
E-Mail (Support): support@easysync.co.uk

US Office
EasySYNC Limited (USA)
7235 NW Evergreen Parkway
Suite 600
Hillsboro, OR 97124-5803
USA

Tel: +1 (503) 547 0909
Fax: +1 (503) 547 0987

E-Mail (Sales): sales@easysync-ltd.com
E-Mail (Support): support@easysync-ltd.com


 


EasySYNC Ltd. Launches New OBD-II Cable

22 Jun 2010

EasySYNC Ltd. launched today the OBD-M-DB9-ES cable accessory which supports a DB9 to OBD-II interface. The DB9 to OBD-II adapter cable is a simple adapter to allow the EasySYNC range of CANbus products to mate to OBD-II interface connectors commonly used in automotive diagnostics and industrial applications.  The DB9 end plugs directly into the EasySYNC CANPlus modules or any CANbus adapter that conforms to the CAN-in-Automation (CiA) DS102-2 pin-out.  The OBD-II end plugs directly into an automotive diagnostic port or industrial device.  The OBD-M-DB9-F-ES cable is 900 mm in length. 

The OBD-M-DB9-ES cable accessory rounds out the EasySYNC CANbus product line which includes the USB2-F-7001, a 1-port USB to CANbus adapter and the SI-A-7001, a 1-port RS232 to CANbus adapter. In addition, EasySYNC will be releasing an isolated USB to CANbus product, the USB2-F-7101, in December 2010.

The OBD-M-DB9-F-ES is a lead-free device that complies with the following environmental directives: RoHS, WEEE, REACH, PFOS and DecaBDE.  The OBD-M-DB9-ES cable has a one piece price of $12.00 (£7.79).

The EasySYNC products can be found at the links below:

OBD-M-DB9-ES http://www.easysync-ltd.com/product/577/obd-m-db9-f-es.html

USB2-F-7001 http://www.easysync-ltd.com/product/556/usb2-f-7001.html

S1-A-7001 http://www.easysync-ltd.com/product/557/s1-a-7001.html
 


New Hi-Speed USB to Serial Adapters launched

31 Mar 2010

A range of Full-/Hi- Speed USB 2.0 to single and multi-port RS232, RS422 or RS485 adapters.  Provide simple method for connecting multiple serial interfaces to a single PC over USB.

·    High data transfer rates with speeds (up to 10MBaud on multi-port USB 2.0 Hi-Speed modules, 3MBaud on single-port USB 2.0 Full Speed modules).
·    USB protocol conversion handled by internal FTDI ICs, supplied complete with software drivers.  
·    All level shifting is handled internally.  No external power required as the unit is powered from the USB port.
·    Extended temperature support (-400C to +850C).
·    All modules are CE/FCC approved.
·    Datasheets and drivers all downloadable, royalty free.


Part No.

USB2-F-1001

USB2-H-1002

USB2-H-1004

USB2-F-6001

USB2-H-6002

USB2-H-6004

USB2-F-5001

USB4-H-5002

USB2-H-5004

Interface

RS232

RS232

RS232

RS422

RS422

RS422

RS485

RS485

RS485

No. Serial Ports

(DE-9P Connectors)

1

2

4

1

2

4

1

2

4

Serial Port Speed

1MBaud

1MBaud

1MBaud

3MBaud

10MBaud

10MBaud

3MBaud

10MBaud

10MBaud

LEDs Tx/Rx, Power

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

+5V Output
voltage supply

Yes *

-

-

-

-

-

Yes

Yes

Yes

Ring indicator
(for remote wakeup)

Yes *

Yes

Yes

-

-

-

-

-

-

RTS/ CTS
flow control

Yes

Yes

Yes

Yes

Yes

Yes

-

-

-

2-Wire

-

-

-

-

-

-

Yes

Yes

Yes

Local Echo Option

-

-

-

-

-

-

Yes

Yes

Yes

FTDI USB to Serial converter ICs

FT232R

FT2232H

FT4232H

FT232R

FT2232H

FT4232H

FT232R

FT2232H

FT4232H

USB interface

Full Speed
(12Mbps)

Hi-Speed
(480Mbps)

Hi-Speed
(480Mbps)

Full Speed
(12Mbps)

Hi-Speed
(480Mbps)

Hi-Speed
(480Mbps)

Full Speed
(12Mbps)

Hi-Speed
(480Mbps)

Hi-Speed
(480Mbps)


* Option to select +5V output or allow signal to be used as ring indicator.  Selection made by configuring internal EEPROM using software from FTDI.


CANBUS adapters launched

31 Mar 2010

NEW CAN BUS SOLUTIONS AT EASYSYNC

S1-A-7001 - RS232 to CANbus Adapter

The S1-A-7001 is an RS232 to CANbus adapter which supports operations up to 1Mbps on both RS232 and CANbus interfaces.   The S1-A-7001 comes in an enclosure which is rated for operation for industrial temperature ranges.  The compact size of the S1-A-7001 allows the adapter to be used in a variety of applications, from a portable laptop to permanent installations in industrial and commercial environment.

Features:
·    Integrated PIC with the ECAN controller.
·    LEDs indicate Initialization and CANbus status for monitoring port status & easy
     diagnostics.
·    Supports 11-bit and 29-bit CAN messages.
·    CANbus connector conforms to CiA DS102-2.
·    Operating temperature of -40°C to +85°C.
·    CE/FCC approved.
·    Requires an external power supply (on CANbus connector) with input voltage
     range of +6VDC to +15VDC.

USB2-F-7001 - Full-Speed USB to Single Port CANbus Adapter


The USB2-F-7001, USB to CANbus adapter, provides a fast and simple way to connect a CANbus device to a PC via a USB port.  The USB2-F-7001 unit supports industrial temperature ranges and is supplied in an enclosure.  Software drivers and an API library to enable software application development are also supplied with the unit.

Features:
·    Easy plug & play installation and CANbus device connection.
·    Can handle up to 1Mbit/s CAN bitrate.
·    Operates with USB 1.1 & 2.0 Host and Hub ports.
·    Microchip PIC18F2680 CAN Controller and Microchip MCP2551CAN Tranceiver (Fully
     Compatible with ISO 11898-24V).
·    Uses the FTDI FT245R USB to FIFO converter.  
·    Software drivers for Windows and Linux.  Software development API.
·    No external power supply needed -powered via USB interface (0.9 meter USB
     cable included).
·    Industry Standard FTDI chip set & drivers for maximum compatibility.
·    Industrial temperature range (-400C to +850C).
·    CE/FCC approved.
·    Supplied complete with enclosure and wall mounts


Latest News

Login

Currencies

Shopping Cart

Cart is empty.

Bestsellers

ES-U-1001-R10

ES-U-1001-R10

Price: $17.50
ES-U-1001-R100

ES-U-1001-R100

Price: $20.30
ES-U-1001-A

ES-U-1001-A

Price: $14.00